Radha Krishna Pairs, 15 inch and above
About this collection
Large Radha Krishna pairs are made for a temple room, an entrance or a corner of the living room, where a big figure is the focus. At this size the weight is measured in kilos, so the stand and the floor under it matter as much as the design. The thing that matters most is planning: decide where the figure will stand, then check the weight and the base before you order.
Most pieces in this group are brass, with a few in aluminium or silver plated, and each listing names its metal. Move a large pair with two people, lifting from the base rather than the arms or the crown. Dust it with a soft brush.
Also searched as: krishna ji with cow idol 19 inches, krishna ji with cow idol 16 inches, radha krishna statue 2 feet, radha krishna statue 3 feet.
-
-
-
Radha Krishna Idol in Brass, on Jhula, 15 inch – for Temple and Entrance
7.9 kg · Stone and colour work
-
-
Krishna Ji with Cow Idol in Brass (Radha), 19.4 inch – for Temple and Entrance
11.55 kg · Polished
-
-
Radha Krishna Idol in Brass, 17 inch, 10.83 kg – for Temple and Entrance
10.83 kg · Polished
-
Radha Krishna Idol in Brass, 29 inch, design BS075-R – for Temple and Entrance
15.27 kg · Polished
-
Radha Krishna Idol in Brass, on Jhula, 21 inch – for Temple and Entrance
16.15 kg · Stone and colour work
-
-
-
Radha Krishna Idol in Brass (Darbar), 31.7 inch, 30.25 kg – for Temple and Entrance
30.25 kg · Stone and colour work
-
Radha Krishna Idol in Brass, 24 inch – for Temple and Entrance
25.77 kg · Stone and colour work
-
Radha Krishna Idol in Brass, 29 inch, design BS073 – for Temple and Entrance
31.4 kg · Polished
-
Radha Krishna Idol in Brass (Platform), 27 inch – for Temple and Entrance
36.24 kg · Polished
-
Radha Krishna Idol in Brass (Same Big), 28 inch – for Temple and Entrance
38.75 kg · Stone and colour work
-
Radha Krishna Idol in Brass (Darbar), 45 inch – for Temple and Entrance
58 kg · Stone and colour work
-
Radha Krishna Idol in Brass, 29 inch, design BS073-R – for Temple and Entrance
15.27 kg · Polished
-
-
-
Radha Krishna Idol in Brass (Krishan), 17 inch – for Temple and Entrance
15.85 kg · Polished
-
Radha Krishna Idol in Brass (Darbar Work), 45.3 inch – for Temple and Entrance
63 kg · Stone and colour work
-
-
-
-
-
-
-
-
-
-
-
-
-
Radha Krishna Idol in Brass, on Jhula, 18.5 inch – for Temple and Entrance
7.26 kg · Stone and colour work
-
Good to know
Where should a large Radha Krishna pair stand?
A large pair suits a temple, an entrance or a living room corner with a firm floor or a strong table. Check the weight on the listing and make sure the surface can carry it.
How heavy are these pieces?
Weights vary a lot across this group, and many pieces weigh several kilos. Check the listing before choosing where the figure will stand.
How should a large brass figure be cleaned?
Dust it with a soft brush and wipe the surface with a dry cloth. Use mild soap only for marks, and dry the figure fully before putting it back.