Krishna Ji with Flute Idol in Brass, 15 inch – for Temple and Entrance

Krishna Ji with Flute Idol in Brass, 15 inch

1 / 3

MoradabadGI tagged

Krishna Ji with Flute Idol in Brass, 15 inch – for Temple and Entrance

$414

Delivery to United States: $37 · 9 to 17 days

Weight2.1 kg
Height15 in
FinishPolished
MetalPure brass

Solid brass at 2.1 kg. A plated or alloy piece this size weighs about 945 g.

Good for Home mandir

Also in Big Krishna statues Radha Krishna under ₹1,000 Idols under ₹500

Solid brass, made in Moradabad. Sand cast, hand finished and polished in the workshop. Expect small variations in engraving and tone from piece to.

Dispatches in 2 working daysPacked for export and sent with tracking. Import duties and taxes, if any, are paid on delivery.

Questions before you buy?Ask on WhatsApp

GI tagged crafts
Packed for export
Damage cover
PayPal and cards

MMade byArtisans of Moradabad, Uttar PradeshSand cast, hand engraved, lacquer finishedMoradabad Metal Craft, GI tagged

About this piece

This Krishna ji idol with flute is 15 inches high and weighs 2,100 grams. Made from pure brass and polished in Moradabad, it suits a temple or a large home mandir. The figure is finished evenly.

Wipe with a soft dry cloth and keep it dry. Lemon and salt clear tarnish from the detail; rinse at once. It is a fitting gift for Janmashtami or a wedding.

The craft

Moradabad. Cast, hammered and lacquered by hand, for three hundred years.

Sand cast, hand engraved, lacquer finished.

Moradabad Metal Craft, GI tagged

How it is made

Brass is melted and poured into sand moulds, cooled, then turned on a lathe to true the shape. Engravers cut the pattern by hand with a hammer and chisel. The piece is polished on a buffing wheel and sealed with a clear lacquer so it stays bright without weekly cleaning.

Care, shipping and returns

Wipe with a dry cloth. Keep away from detergents and damp. Handmade pieces vary slightly in finish, that is the point.

Dispatch in 1 to 3 working days from India by tracked courier. Shipping is charged by parcel weight and shown at checkout. Import duties and taxes, if any, are collected by the courier on delivery.

Arrived damaged or not as described? Send a photo on WhatsApp or email within 48 hours of delivery and we send a replacement at our cost. International orders cannot be cancelled or returned once shipped. Full international terms.

Details

Weight: 2.1 kg
Size: 17.8 × 11.4 × 38.1 cm
Material: Pure brass
Finish: Polished
Height: 15 inch and up
Deity: Radha Krishna
Base Metal: Brass
Made in: Moradabad
SKU: BGC-BS1806-K

Good to know

All Idols and Murtis

Which size idol suits a home mandir?

3 to 5 inch for a shelf mandir, 6 to 10 inch for a pooja room, 12 inch and up for a temple or entrance. Height is on every listing; allow 6 inches of clear space around a large idol.

Is this idol solid brass?

Yes, sand cast in our Moradabad workshop, polished and lacquered. The weight in grams on the listing is the honest measure; thin sheet idols weigh half as much.

How do I clean a brass idol?

Lacquered idols: a soft dry cloth. Raw brass: lemon and salt or tamarind pulp, rinse, dry at once. No steel wool, no acid soak beyond ten minutes.

Can I use it for daily puja and for festivals?

Yes. Brass idols are permanent; they are bathed, dressed and worshipped year after year and are not immersed.

Is gift packing available?

Yes, every idol ships in a rigid box with a card slot, dispatched within two working days, COD across India.

Is 2.1 kg steady?

At 2.1 kg it sits firmly on a sturdy shelf.

Is 15 inch right for a home mandir?

At 15 inch it suits a pooja room with space around it.

Similar pieces